IMG-LOGO

Artículos científicos

Tensile characterization of the MC and Luisa Avanzo cultivars of the species Populus × euramericana. 2026

Fuentes-García, Y., Rescalvo, F. J., Gallego, A., Ripoll, M. A., Cruz, C., Ruy, M., Portela, M., Guaita, M., Llana, D. F., Íñiguez-González, G., Esteban, M., & Arriaga, F.

Detalle
Structural performance and analytical modelling of hybrid pine-poplar glulam beams through efficient use of resources. Structures, 86, 111464. 2026

Cruz, C., Bravo, R., Rescalvo, F. J., Fuentes-García, Y., & Lafuente-Bolívar, F. J.

Mechanical characterization and numerical modelling of enhanced hybrid glulam beams of eucalyptus and poplar for structural applications. Mechanics of Advanced Materials and Structures, 33(1), 2636074. 2026

Cruz Rodríguez, C., Bravo, R., Rescalvo, F. J., Fuentes-García, Y., & Lafuente-Bolívar, F. J.

Development of high-performance glulam beams of Pinus nigra with embedded CFRP for its application for a real case for structural rehabilitation. Structures, 78, 109344. 2025

Cruz, C., Bravo, R., Rescalvo, F. J., Fuentes-García, Y., Lafuente-Bolívar, F. J., & Gallego, A.

Calibration strategy for a nondestructive wood characterization tool using optimized time-of-flight determination and material propagation analysis. Measurement Science and Technology, 36(4), 046134. 2025

Gil-Martín, I., Suarez, E., & Roldán, A.

Relationship between the acoustic emission and the strain field in finger joints of engineered wood products for construction. Engineering Failure Analysis, 162, 108411. 2024

Rescalvo, F. J., Portela, M., Cruz, C., Bravo, R., & Lorenzana, J. A.

Experimental study of hybrid pine-birch glued-laminated timber beams assisted by digital image correlation technique. European Journal of Wood and Wood Products, 82(4), 1187-1199. 2024

Timbolmas, C., Bravo, R., Rescalvo, F. J., Ringhofer, A., Sieder, R., & Lorenzana, J.

Non-audible acoustic emission characterization of Reticulitermes termites in pine wood. European Journal of Wood and Wood Products, 81, 935-945. 2023

Suarez, E., Fuentes, Y., Gaju-Ricart, M., et al.

Multi-side digital image correlation (DIC) evaluation of CFRP bonded to poplar timber. Mechanics of Advanced Materials and Structures, 31(15), 3367-3376. 2023

Rescalvo, F. J., Timbolmas, C., Bravo, R., Portela, M., & Lorenzana, J.

Digital image correlation and numerical analysis of CFRP-poplar timber interface subjected to modified single shear test. Composite Structures, 320, 117188. 2023

Timbolmas, C., Bravo, R., Rescalvo, F. J., Villanueva, P., & Portela, M.

Non-Destructive Multi-Feature Analysis of a Historic Wooden Floor. Buildings, 12(12), 2193. 2022

Cruz, C., Gaju, M., Gallego, A., Rescalvo, F., & Suarez, E.

Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses. Wood Material Science & Engineering, 18(3), 893-901. 2022

Rescalvo, F. J., Duriot, R., Pot, G., & Gallego, A.

Influence of weathering on mechanical properties of culm samples of Guadua angustifolia Kunth bamboo with and without nodes. Wood Material Science & Engineering, 18(2), 434-445. 2022

Suarez, E., Rescalvo, F. J., Fernandez, A., Cruz, A., & Gallego, A.

Development of an analytical model to predict the bending behavior of composite glulam beams in tension and compression. Journal of Building Engineering, 45, 103471. 2022

Timbolmas, C., Bravo, R., Rescalvo, F. J., & Gallego, A.

Analysis of poplar timber finger joints by means of digital image correlation (DIC) and finite element simulation subjected to tension loading. European Journal of Wood and Wood Products, 80(3), 555-567. 2022

Timbolmas, C., Rescalvo, F. J., Portela, M., & Bravo, R.

Transformed-section method applied to multispecies glulam timber beams subjected to pure bending. Mechanics of Advanced Materials and Structures, 29(27), 6814-6823. 2021

Timbolmas, C., Bravo, R., Rescalvo, F. J., & Portela, M.

Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: Influence of the age and stand density. European Journal of Wood and Wood Products, 79(5), 1225-1239. 2021

Gallego, A., Ripoll, M. A., Timbolmas, C., Rescalvo, F., Suarez, E., Valverde, I., Rodríguez, M., Navarro, F. B., & Merlo, E.

Improving ductility and bending features of poplar glued laminated beams by means of embedded carbon material. Construction and Building Materials, 304, 124469. 2021

Rescalvo, F. J., Timbolmas, C., Bravo, R., Valverde-Palacios, I., & Gallego, A.

An insight into mechanical properties of heartwood and sapwood of large French Douglas-fir LVL. Construction and Building Materials, 299, 123859. 2021

Duriot, R., Rescalvo, F. J., Pot, G., Denaud, L., Girardon, S., & Frayssinhes, R.

Experimental and numerical analysis of mixed I-214 poplar/Pinus sylvestris laminated timber subjected to bending loadings. Materials, 13(14), 3134. 2020

Rescalvo, F. J., Timbolmas, C., Bravo, R., & Gallego, A.

Enhancement of bending properties of Douglas-fir and poplar laminate veneer lumber (LVL) beams with carbon and basalt fibers reinforcement. Construction and Building Materials, 263, 120185. 2020

Rescalvo, F. J., Duriot, R., Pot, G., Gallego, A., & Denaud, L.

Acoustic emission in I-214 poplar wood under compressive loading. European Journal of Wood and Wood Products, 78(4), 723-732. 2020

Rescalvo, F. J., Morillas, L., Valverde-Palacios, I., & Gallego, A.

Acoustic Emission and Numerical Analysis of Pine Beams Retrofitted with FRP and Poplar Wood. Materials, 13(2), 435. 2020

Rescalvo, F. J., Rodríguez, M., Bravo, R., Abarkane, C., & Gallego, A.